Evaculine 64 Evacuation System Cleaner

Evaculine 64 Dental Evacuation System Cleaner is a new and improved, concentrated (64x) evacuation system cleaning formulation offered in a space saving and convenient 1 L. Tip-n-Measure bottle. 

Evaculine 64 Dental Evacuation System Cleaner has been developed to meet the requirements of evacuation systems that are sensitive to acid cleaners but require powerful cleaning compounds. Non-acid and free of hypochlorites (bleach), Evaculine 64 will not cause leaching of mercury from amalgam separators.

  • Removes organic waste
  • Cleans and deodorizes
  • Corrosion protection
  • Non-acid
  • Low foaming formulation
  • Fresh lemon scent

Grouped product items
Evaculine 64 Evacuation System Cleaner - 1 L Jug
Evaculine 64 Evacuation System Cleaner - 1 L Jug Item 60036
Customer not logged
Evaculine maxblast - Evac System Cleaning Pitcher
Evaculine maxblast - Evac System Cleaning Pitcher Item 60033
Customer not logged

Please read the SDS for safe handling information.

Physical Data:

Clear, fluorescent yellow liquid with a lemon scent
pH (concentrate): approximately 12.30

Product Availability:

Evaculine 64 evacuation system cleaner has been developed to meet the requirements of evacuation systems that are sensitive to acid cleaners but require powerful cleaning compounds. Free of hypochlorites (bleach), Evaculine 64 will not cause leaching of mercury from amalgam separators. The combination of quaternary ammonium compounds, metasilicates and alcohols provides excellent cleaning and significant bacterial reduction leaving the evacuation system clean and fresh for continued use.

Designed for use with Amalgam Separator equipped systems.

Economical Concentrate:

Evaculine 64 is a 64x concentrate in a handy
1 L Tip ’n Measure bottle.

Makes up to 64 L.

Directions:

Dilute with tap water. Aspirate / vacuum the diluted solution through the evacuator lines and cuspidor. Repeat this procedure for each dental unit at least once on a daily basis.

Dilution Guide

Enter the desired amount of working solution (L):

Water (L):

Evaculine 64 Evacuation System Cleaner (mL):

1 L Bottle..........#60036


Directions for Use with Evaculine maxblast Purging Pitcher:

Making 1 L of Working Solution Making 2 L of Working Solution Making 3 L of Working Solution
Evaculine 64 Pour in 16 mL of Evaculine 64
and fill with tap water to 1 L mark.
Pour in 32 mL of Evaculine 64
and fill with tap water to 2 L mark.
Pour in 48 mL of Evaculine 64
and fill with tap water to 3 L mark.

** RINSE PITCHER AFTER EACH USE. **

Safety Data Sheets
pdf
(Size: 211.3 KB)
pdf
(Size: 270.7 KB)
Product Information Sheets
Instructions For Use