Evaculine 64 Evacuation System Cleaner

Evaculine 64 Dental Evacuation System Cleaner is a new and improved, concentrated (64x) evacuation system cleaning formulation offered in a space saving and convenient 1 L Squeeze 'n' Measure bottle.

Evaculine 64 Dental Evacuation System Cleaner has been developed to meet the requirements of evacuation systems that are sensitive to acid cleaners but require powerful cleaning compounds. Non-acid and free of hypochlorites (bleach), Evaculine 64 will not cause leaching of mercury from amalgam separators.

  • Removes organic waste
  • Cleans and deodorizes
  • Corrosion protection
  • Non-acid
  • Low foaming formulation
  • Fresh lemon scent

Safety Data Sheets
Instructions For Use
Product Information Sheets

Evaculine 64 evacuation system cleaner has been developed to meet the requirements of evacuation systems that are sensitive to acid cleaners but require powerful cleaning compounds. Free of hypochlorites (bleach), Evaculine 64 will not cause leaching of mercury from amalgam separators. The combination of quaternary ammonium compounds, metasilicates and alcohols provides excellent cleaning and significant bacterial reduction leaving the evacuation system clean and fresh for continued use. Designed for use with Amalgam Separator equipped systems.

Directions:

Dilute with tap water. Aspirate / vacuum the diluted solution through the evacuator lines and cuspidor. Repeat this procedure for each dental unit at least once on a daily basis.

Dilution Guide

Enter the desired amount of working solution (L):

Water (L):

Evaculine 64 Evacuation System Cleaner (mL):

Pitcher Perfect

1

Spill Stopper Lid

Snug fitting, easy pour lid prevents spills.

2

Dual High & Low Volume Ports

Dual high and low volume ports molded into the lid for easy, spill free aspiration of evacuation cleaning solution.

3

Smooth Pour Spout

Smooth pour spout for cleaning cuspidors or pouring unused evacuation cleaning solution.

4

Turbulent Suction

Suction tubes create a turbulent mixture of air and cleaning solution to clean your evacuation system.

5

Easy Grip Handle

Ergonomic, wide grip handle design makes traveling between operatories a breeze.

6

3 Litre Capacity

3 litre capacity with graduated markings holds enough solution to clean 3 operatories. The translucent design makes it easy to see the level of liquid in the pitcher.

7

Wide Base

Extra wide base provides stability when preparing and aspirating evacuation cleaner.

Pairs perfectly with your favourite maxill evacuation cleaning solution

Use with any one of maxill’s Canadian made evacuation system cleaning solutions to keep your evacuation system running at full capacity

Making 1 L of Working Solution
Making 2 L of Working Solution
Making 3 L of Working Solution
Making 1 L of Working Solution Pour in 16 mL of Evaculine 64 and fill with tap water to 1 L mark.
Making 2 L of Working Solution Pour in 32 mL of Evaculine 64 and fill with tap water to 2 L mark.
Making 3 L of Working Solution Pour in 48 mL of Evaculine 64 and fill with tap water to 3 L mark.
Making 1 L of Working Solution Pour in 8 mL of Zymax 128 and fill with tap water to 1 L mark.
Making 2 L of Working Solution Pour in 16 mL of Zymax 128 and fill with tap water to 2 L mark.
Making 3 L of Working Solution Pour in 24 mL of Zymax 128 and fill with tap water to 3 L mark.
Making 1 L of Working Solution Pour in 8 mL of Zymax LF and fill with tap water to 1 L mark.
Making 2 L of Working Solution Pour in 16 mL of Zymax LF and fill with tap water to 2 L mark.
Making 3 L of Working Solution Pour in 24 mL of Zymax LF and fill with tap water to 3 L mark.
Making 2 L of Working Solution
Making 2 L of Working Solution Drop one tablet into an Evaculine maxblast Pitcher filled with 2 L of lukewarm water.
RINSE PITCHER AFTER EACH USE.